EASY APPLICATION IN 4 STEPS
1st Step:
Sweep off
Before installation remove any dirt from the surface.
2nd Step:
Pre-spray
RECOMMENDATION: For maximum durability, we advise that you treat the installation surface with a bituminous primer like EASYPHALT® PRIME.
Recommended step – not mandatory.
3rd Step:
Spread
Spread the required amount of EASYPHALT® slightly protruding the height of the original surface.
4th Step:
Moisten and compress
EASYPHALT® PRO and EASYPHALT® AQUA soak with water (about 5 litres of water per 25 kg bucket). Compress all EASYPHALT® with a roller, vibratory plate or hand tamper. The surface can be approved for traffic immediately after installation.
Moisten only if using EASYPHALT® PRO and EASYPHALT® AQUA
