GRAIN
0/8
RECOMMENDED INSTALLATION
3-5 cm
(install more than 4 cm in multiple layers)
CONTENT
25 KG
Vacuum-packed

The high-performance cold mixture for low, medium and high load traffic surfaces

ready to use | stable | extremely durable | solvent free | reactive | ready for traffic immediately

Vacuum-packed

EASYPHALT® PRO meets the highest load requirements and is suitable for repairs on roads with high traffic loads, secondary roads, parking lots, driveways as well as sidewalks and industrial traffic areas. In addition, EASYPHALT® PRO is perfect for closing the road surface after civil engineering works as well as for road connections next to and between tracks (trams, railway crossings, etc.) and for the connection of manhole covers. Installation is even possible on damp surfaces.

INSTALLATION

EASYPHALT® BASIC, EASYPHALT® PRO and EASYPHALT® AQUA can be installed year-round at temperatures between -20°C and +45°C. Before installation, please store at room temperature.

CONSUMPTION & PACKAGING

EASYPHALT® BASIC, EASYPHALT® PRO and EASYPHALT® AQUA are available in buckets of 25 kg each (equivalent to 1 m² at an installation depth of 1 cm). The shelf life is 12 months in the unopened bucket. The shelf life of vacuum-packed goods increases to 18 months.

EASYPHALT® PRODUCT VIDEO


EASY APPLICATION IN 4 STEPS

1st Step:
Sweep off

Before installation remove any dirt from the surface.

2nd Step:
Pre-spray

RECOMMENDATION: For maximum durability, we advise that you treat the installation surface with a bituminous primer like EASYPHALT® PRIME.

Recommended step – not mandatory.

3rd Step:
Spread

Spread the required amount of EASYPHALT® slightly protruding the height of the original surface.

4th Step:
Moisten and compress

EASYPHALT® PRO and EASYPHALT® AQUA soak with water (about 5 litres of water per 25 kg bucket). Compress all EASYPHALT® with a roller, vibratory plate or hand tamper. The surface can be approved for traffic immediately after installation.

Moisten only if using EASYPHALT® PRO and EASYPHALT® AQUA