GRAIN
0/8
RECOMMENDED INSTALLATION
3-5 cm
(install more than 4 cm in multiple layers)
CONTENT
25 KG
Vacuum-packed

The water-permeable high-performance cold mixture for open-pored, sound-reducing, low, medium and high load traffic surfaces.

ready to use | permanent | extremely durable | solvent free | reactive | ready for traffic immediately

 

Specially designed for the repair of water-permeable, noise-reducing asphalt.

Vacuum-packed

EASYPHALT®AQUA meets the highest demands in terms of load, is permeable to water and is especially suitable for repairing water-permeable, noise-reducing asphalt on roads with heavy traffic, secondary roads, parking lots, driveways as well as industrial traffic areas. Installation is even possible on damp surfaces.

INSTALLATION

EASYPHALT® BASIC, EASYPHALT® PRO and EASYPHALT® AQUA can be installed year-round at temperatures between -20°C and +45°C. Before installation, please store at room temperature.

CONSUMPTION & PACKAGING

EASYPHALT® BASIC, EASYPHALT® PRO and EASYPHALT® AQUA are available in buckets of 25 kg each (equivalent to 1 m² at an installation depth of 1 cm). The shelf life is 12 months in the unopened bucket. The shelf life of vacuum-packed goods increases to 18 months.

EASYPHALT® PRODUCT VIDEO


EASY APPLICATION IN 4 STEPS

1st Step:
Sweep off

Before installation remove any dirt from the surface.

2nd Step:
Pre-spray

RECOMMENDATION: For maximum durability, we advise that you treat the installation surface with a bituminous primer like EASYPHALT® PRIME.

Recommended step – not mandatory.

3rd Step:
Spread

Spread the required amount of EASYPHALT® slightly protruding the height of the original surface.

4th Step:
Moisten and compress

EASYPHALT® PRO and EASYPHALT® AQUA soak with water (about 5 litres of water per 25 kg bucket). Compress all EASYPHALT® with a roller, vibratory plate or hand tamper. The surface can be approved for traffic immediately after installation.

Moisten only if using EASYPHALT® PRO and EASYPHALT® AQUA